The right equipment every time
with our wide range of vacuums and lifting equipment.

A powerful and smart device
little lift – pretty big

• multiple domains
• time-saving – installed in only few minutes even by a untrained person
• Easy set-up / 90 per cent time-saving
• little weight – heaviest component weights less than 30 kilograms (60 pounds) and is equipped with two carrying handles
• space-saving – fits into every room, because of its small base area

Counterweight Holder for different weights

• Glazing of roof overhangs
• UPG Series Vacuum Lifters can be mounted
• Flexible use on construction sites
• Suspension quick and easily on the crane eyelet
• With variable counterweights or fixed block

The strongest and safest of its class

• Lifting capacity max. 425 kg
• Reliable to use indoor and outdoor
• Max. lifting height (vertical) 3,00 m
• Max. lifting height (overhead) 3,40 m
• Lifting capacity fully extended 150 kg
• Standard handlebar hinged
• Optional wireless remote control for lifting arm and suction disc movements
• Operating time min. 14 hours
• Individual arrangement of the suction cups
• Self monitoring system
• 24 V automotive socket

The strongest off-road glass lifter of its class

• Lifting capacity max. 625 kg
• Max. lifting height (vertical) 3,10 m/3,60 m „Highlifter“
• Max. lifting height (overhead) 3,60 m/4,35 m „Highlifter“
• Individual arrangement of the suction cups
• Hydraulic rotator as a standard feature
• Standard wireless remote control for boom and suction disc movements
• Self monitoring system

Glass elements smiply lift and transport

• Lifting capacity up to 350 kg
• 2-circuit-system
• Height of device min. 210 mm
• Manual turning 360° (raster by 45°) / Manual tilting by 90°
• DIN EN 13155

Special made for longer Glass-Sheets

• Lifting capacity up to 450 kg
• 2-circuit-system
• Height of device min. 118 mm
• Intelligent “complete shut-off switch”
• DIN EN 13155

For transporting, lifting and mounting glass and window elements

• Lifting capacity up to 600 kg
• 2-circuit-system
• Height of devices min. 139 mm
• Manual turning by 360°
• 12-fold lockable grid, automatic locking at 90 °
• DIN 13155

• Lifting capacity up to 1000 kg
• 2-circuit-system
• Sucion cups Ø 400 mm
• 8 hours of operation
• DIN 13155

Raises wall panels, sandwich panels and trapezoidal sheets

• Lifting capacity up to 300 kg
• Stepless swivel unit from 0° to 90 °
• For panels up to 18 m length
• DIN 13155

Load lifting attachment with load hook for lifting and positioning construction elements

• can be dismantled for transport by trailer or sprinter
• electrically driven counterweights allow balancing the loads up to 800 kg
• battery-powered energy supply with high capacity
• built-in gauge for monitoring energy supply

1 Men – Glass mounting device

• For lifting, lowering or tilting elements up to 150 kg
• Total width from 675 mm to 905 mm
• Rotates elements up to 2.4 m in length
• Lifting height 1.7 m
• Pole swivelable by ± 90 °
• Suction unit rotatable 360°

• Raises, lowers and tilts elements up to 250 kg
• Uncomplicated and fast setup
• Total width from 680 mm to 910 mm (without vacuum system)
• stroke approx. 1,000 mm
• Rotates elements up to 2.5 m in length
• Mast swivelable by ± 90°
• Mast tiltable by  +7° / -30°
• Suction unit rotatable 360°
• Non-slip handles

Off-road transport with pneumatic tires

• Max. load 600 kg
• Suitable for all types of materials
• Individually adjustable width through Screwing system (max. 2,000 mm)
• Air tire with brake on each wheel
• Easy tranpsort

Full rubber override perfect for indoor

• Max. load 800kg
• Suitable for all types of materials
• Individually adjustable width through Screwing system (max. 2,000 mm)
• Full rubber override with parking brake on each wheel
• Easy Transport

Robust and simple mounting aid for inside and outside

• Load capacity max. 180 kg
• 2 Users up to 90 kg / 3 Useres 90 – 180 kg
• 1 suction plate, ø 204 mm
• 2-ply airbore ø 260 mm
• Rubber support surface
• Heavy, welded aluminum version
• 1 set of roller blocks
• incl. edge protection

The ideal accessory for the vacuum suction discs UPG 350-2,
UPG 600-2 or UPG 1000

For easy overcoming of sleepers

• Galvanized lasered steel pan
• Easily overcomin thresholds or obstacles
• load max. 300kg
• Its like a extra assistant on the site
• Move heavy loads

Like an extra helper

• Galvanized lasered steel pan
• Easily overcomin thresholds or obstacles
• Bearing capacity 300 kg
• Like an extra assistant on the site
• Moving heavy loads
• Fast and energy saving
• Wide support surface

With practical carrying handles

• Galvanized lasered steel pan
• Practical carrying handle
• Easily overcoming thresholds or obstacles
• max. load 500kg
• Like an extra assistant on the site
• 4 bicyles for more stability

Ideal for flat and smooth surfaces

• Load max. 50 kg incl. 3:1 safety factor
• For non-porous flat surfaces
• Suction plate ø 204 mm, flat
• Redline ring warns of potential vacuum loss
• Handle plastic ABS
• incl. plastic carrying case

Ideal for flat and smooth surfaces

• Load max. 60 kg incl. 3:1 safety factor
• For non-porous flat surfaces
• Suction plate ø 204 mm, flat
• Redline ring warns of potential vacuum loss
• Handle metal
• incl. plastic carrying case

The smallest Maeda Mini Crane, but whit excellent load bearing capacity

• 0.995 Ton Max capacity
• 5.5 m Max Working Height
• Slim Body (600 mm)
• Electric Motor
• Low Ground Pressure
• Manoeuvrability & Stability
• Hydrostatic Transmission
• Remote Control

The measure for all other minikranes

• 1.72 Ton Max capacity
• 5.5 m Max Working Height
• Super Slim Body Width (590 mm)
• Low Ground Pressure
• Manoeuvrability & Stability
• Programmable Moment Limiter
• Hydrostatic Transmission
• High Speed Winch
• 2 Travel Speeds
• Optional 300 kg Searcher Hook
• Remote Control
• Tilt Alarm

Our most popular Mini Crane can be used in a wide range of Areas

• 2.82 t max capacity
• 8.7 m max lifting height
• Multi outrigger positions
• Crane/outrigger Iinterlock system
• 7” Display
• HBC Radio Remote Control
• Working limit settings
• Progra mmable moment limiter
• Data logger
• Tilt alarm
• 4/2 Fall hook block
• Optional detachable electric motor
• Optional 850 kg
• Searcher hook
• Optional single fall hook
• Optional 900 kg
• Auxiliary winch

Convincing with its superior quality and long service life

• 2.98 Ton Max Capacity
• 12.52 m Max Working Height
• Energy Saving System
• Sheaves Protected Inside Boom
• Variable (Hi/Lo) Travel Speeds
• Programmable Moment Limiter
• Hydrostatic Transmission
• Centralized Controls
• 4 Fall / 2 Fall Hook Block
• Automatic Hook Stowage System
• Tilt Alarm
• Powerful Two Speed Winch with Hydraulic Disc Brake
• Digital Feedback Remote Control
• Outrigger Interlock System
• Optional 300 kg / 850 kg Searcher Hook
• Data Logger

The most powerful Minikran from the MC series

• 3.83 Ton Max Capacity
• 16.8 m Max Working Height
• 20.7 m With Optional Fly Jib
• 500 kg Pick & Carry Duty
• Energy Saving System
• Sheaves Protected Inside Boom
• Variable (Hi/Lo) Travel Speeds
• Programmable Moment Limiter
• Hydrostatic Transmission
• Centralized Controls
• 4 Fall / 2 Fall Hook Block
• Automatic Hook Stowage System
• Tilt Alarm
• Powerful Two Speed Winch with Hydraulic Disc Brake
• Digital Feedback Remote Control
• Outrigger Interlock System
• Optional 500 kg / 850 kg Searcher Hook
• Data Logger

Optional boom tip for the Maeda MC 405 mini crane

• Total load of 170 kg with a max. working radius of 12.5 m
• Lift height of max. 20.70 m with fly jib
• Cable remote control (optional)

The new agile and flexible Minicrane with articulated arm is unique in his branche

• 0.995 Ton Max Capacity
• 11.3 m Max Working Height
• Super Slim Body Width (750 mm)
• Outrigger Interlock System
• Low Ground Pressure
• Manoeuvrability & Stability
• Hydrostatic Transmission
• Tilt Alarm
• Radio Remote Control System
• Optional 820 kg Winch with Hydraulic Disc Brake
• Optional 820kg Winch
• Data Logger

The mini crane from the MC series with Pick & Carry capacity

• Crane capacity 8.09 t x 2.4 m
• 1,000 kg Pick & Carry capacity
• 18.8 m max. working radius
• Digital Feedback Remote Control System
• Electric

Support-free work in confined spaces

• 2.93 Ton max. capacity
• 9.46 m max. working height
• 1465 kg Pick and Carry Duty
• near zero-tailswing
• Diesel

Classes best in terms of security on the site

• 4.9 Ton Max capacity
• 16.35 m Max Working Height 20.3 m With Optional Fly Jib
• Blade
• 2.000 kg Pick & Carry Duty
• Minimal Tail Swing
• Diesel motor

The innovative power pack with a standard rear-view camera

• 6 Ton Max capacity
• 16.7 m Max Working Height 22 m with optional Fly Jib
• 2000 kg Pick & Carry Duty
• Minimal Tail Swing
• Fully enclosed air-conditioned cab with link slide door
• 7 inch TFT Multi Monitor
• Powerful two speed winch with hydraulic disc brake
• Hydrostatic transmission
• 4 Fall / 2 Fall hook block
• Tilt sensor/alarm
• Automatic heptagonal 5-section boom
• Data Logger

Loads cheap lift and tilt

• Lifting capacity 135 kg
• Manual tilting 90°
• Optic / acoustic warning devices (low Vacuum warning buzzer)
• 2-circuit-system

Special made for longer Glass-Sheets

• Lifting Capacity 300/450 kg
• 4 cups + 2 Extensions for 6 cups
• 2-Circuit-System
• Manual Turning 360°
• Manual Tilting 90°
• DIN EN 13155

Effortlessly lifting and moving of complex curved elements

• Hydraulic tilting 90°
• Motorized turning 360°
• Off-grid motor with 12 volts rechargeable battery
• With wired remote control (vacuum / release)
• LED Battery-Status Display
• DIN EN 13155
• Individual arrangement of the spring mounted vacuum cups (Ø 330 mm)
• Optic / acoustic warning devices (low vacuum warning buzzer)

Automatic suction at the push of a button

• Hydraulic tilting 90°
• Motorized turning 360°
• Off-grid motor with 12 volts rechargeable battery
• LED Battery-Status Display
• DIN EN 13155
• Individual arrangement of the spring mounted vacuum cups (Ø 330 mm) without tools
• Optic/acoustic warning devices (low vacuum warning buzzer)

Good adhesion and a lot of application power on the construction site

• Hydraulic tilting 90°
• Motorized turning 360°
• With wired remote control
• Off-grid motor with 12 volts rechargeable battery
• DIN EN 13155
• Extensions for wide elements
• Optic/acoustic warning devices (low vacuum warning buzzer)

Powerful vacuum cleaner with traverse and counterweights

• Hydraulic tilting 90°
• Motorized turning 360°
• Off-grid motor with 12 volts rechargeable battery
• Wireless remote control for all movements
• LED Battery-Status Display
• DIN EN 13155
• Optic / acoustic warning devices (low vacuum warning buzzer)

With optional widening for maximum surface stability

• Hydraulic tilting 90°
• Motorized turning 360°
• With wired remote control
• Off-grid motor with 12 volts rechargeable battery
• DIN EN 13155
• Optic/acoustic warning devices (low vacuum warning buzzer)

• Lifting Capacity 70 kg
• 12 V recharable battery
• manaul tilting 90°
• optic/aucustic warning device

Workplace solution for the indoor use

• Lifting capacity 360 kg
• 2-circuit-system
• Manual turning 360°
• Manual tilting 90°
• Optic warning device

• Lifting Capacity 540kg
• 2-Circuit-System
• Manual Turning 360°
• Manaul Tilting 90°
• DIN EN 13155

Ideal for flat and smooth surfaces

• Load max. 57 kg incl. 3:1 safety factor
• For non-porous flat surfaces
• Suction plate ø 204 mm, flat
• Redline ring warns of potential vacuum loss
• Handle metal

Flexible suction plate edge for flexible materials

• Load max. 68 kg incl. 3:1 safety factor
• For non-porous flat surfaces
• Suction plate ø 230 mm, flat
• Redline ring warns of potential vacuum loss
• Handle metal

Convex suction cup for curved, irregular, non-porous surfaces

• Load max. 79 kg incl. 3:1 safety factor
• For curved load min. Radius 330 mm
• Suction plate ø 254 mm, concave
• Redline ring warns of potential vacuum loss
• Handle metal

Lifting loads up to 170 kg in vertical position

• Suction on smooth surfaces
• Holding force up to 170 kg
• Grip safe plastic handle
• Weight 1,5 kg
• Operating time: 1,5 hours

The flexible option

• Load capacity: 500 kg
• Height: 1.98 m
• Weight: 229 kg

The allrounder with electrohydraulic drive

• Load capacity 300 kg
• Construction height 2.20 m
• Dead weight 227 kg

The compact option

• Load capacity: 250 kg
• Height: 1.89 m
• Weight: 118 kg

Compact, flexible glass lifter with minimal turning radius

• Load capacity: max. 280 kg
• Vertical assembly up to 2.30 m
• Overhead assembly up to 2.65 m
• Stepless drive over the rear axle
• Built-in battery charger

Millimeter accurate lifting and placing of almost a ton of weight

• Lifting capacity max. 850 kg
• Vertical assembly up to 4,25 m
• Overheadwork up to 4,60 m
• Wireless remote control
• Continuously self-propulsion by front axle
• Completely hydraulically lifting movements
• Suction unit with completely hydralically 3-D movements
• Tires suitable for off-road
• Protection class acc. to ip65
• Integrated charger
• Solid construction

The lifting aid for heavy transport

• Load max. 600 kg
• 1-man operation
• Adaptable control lever for easy handling
• Powerful electric motor 12 m / min
• High battery power is enough for about 50 floors
• Precise control by centrally mounted control lever on the steering lever
• Electromagnetic brake at the operating gear ensures max. safety

Flexible and powerful hand laying

• Load capacity: 100 kg
• Weight: 16 kg
• Suction plate: 260 x 210 mm oval
• 2-man operation
• 12 V battery, automatic power-saving function

Full-day laying without recharging

• Load capacity: 150 kg
• Weight: 16.5 kg
• Suction plate: 440 x 250 mm oval
• 2-man operation
• 12 V battery, automatic power-saving function

Efficiently lay large stone slabs

• Max. 140 kg load capacity per suction plate
• Vacuum creation: 0.5 seconds
• Weight: 18 kg
• Interchangeable suction plates
• 230 V electric motor

Patented power-saving technology

• Load capacity: 400 kg
• Weight: 28 kg
• Basic device with suction plate
• 2 vacuum pumps
• 12 V battery, automatic power-saving function

For any weight and task

Use it anywhere

• Max. 1000 kg load capacity per suction plate
• Optional suction plates for different plate sizes and weights
• Weight: 89 kg
• 3-level safety concept
• 230 V electric motor

Handle heavy loads economically and safely

• Max. 1000 kg load capacity per suction plate
• Optional suction plates for different plate sizes and weights
• Weight: 90 kg
• 3-level safety concept
• Petrol engine

The stone lifter for heavy loads

• Load capacity: 2500 kg
• Vacuum pressure: max. 0.6 bar
• Weight: 100 kg
• Quick-change lock for various suction plates
• Electric motor

Specially designed for tough construction-site tasks

Compact and lightweight

• Payload: up to 800 kg
• Maximum extension length: up to 25 m
• Working height: 20 m (up to the boom)

Greater reach and efficiency

• Payload: up to 1500 kg
• Maximum extension length: up to 30 m
• Working height: 22 m (up to the boom)

Great flexibility with folding swivel supports

• Payload: up to 1500 kg
• Maximum extension length: up to 30 m
• Working height: 22 m (up to the boom)

The new top of the class

• Payload: Up to 1500 kg (opt. 2400 kg)
• Extension length: Up to 34 m (opt. 36 m)
• Working height: 22 m (up to the boom)

The cost-effective all-rounder

• Payload: up to 1000 kg
• Maximum extension length: up to 26.5 m
• Working height: 22 m (up to the boom)

The versatile crawler crane for every surface

• Payload: Up to 1500 kg (opt. 2400 kg)
• Extension length: Up to 34 m (opt. 36 m)
• Boom length: 11.05 m (extended)

Unrivalled flexibility

• Payload: up to 250 kg
• Carriage speed: up to 34 m/min.
• Maximum delivery height: 20.30 m

Good value and performance

• Payload: 250 kg
• Total permissible weight: 750 kg unbraked
• Extension height: 1.50 m (without platform)

A compact classic

• Payload: up to 250 kg
• Extension: 4.1 m – 23.7 m
• Total permissible weight: 1200 kg

The most flexible scaffolding lift in the world

• Payload: up to 300 kg
• Maximum extension length: 36 m
• Total permissible weight: 2700 kg

Flexible and versatile mobile crane

• 3500 kg load capacity
• 2500 kg machine weight
• 7.0 m working height
• Boom controlled with joystick
• Electric / diesel

The universal all-rounder

• 5000 kg load capacity
• 5000 kg machine weight
• 8.3 m working height
• Electric motor

Battery powered mobile crane

• 7.000 kg load capacity
• 7.200 kg total weight
• 9,4 m working height
• Elektro motor

For heavy lifting challenges

• 9000 kg load capacity
• 9000 kg machine weight
• 7.5 m working height
• Dimensions 3.755 x 1.735 m
• Electric / diesel

Versatile even in tight spaces

• 12,000 kg load capacity
• 13,000 kg machine weight
• 10.2 m working height
• Dimensions 5.440 x 2.200 m
• Electric / diesel / hybrid

For heavy lifting and transport tasks

• 18,000 kg load capacity
• 20,000 kg machine weight
• 10.0 m working height
• Dimensions 5.440 x 2.200 m
• Electric / diesel / hybrid

Powerful indoors and outdoors

• 25,000 kg load capacity
• 13.5 m working height
• Electric

Reliable and precise lifting

• 40,000 kg load capacity
• 30,000 kg machine weight
• 10 m working height
• Dimensions 5.980 x 2.350 m
• Electric / diesel / hybrid

Ideal for indoor work

• 2500 kg load capacity
• 2200 kg machine weight
• 4.5 m working height
• Completely hydraulic boom
• AC electric motor