Machines: Minicrane MC405 and Glassworker GW1125 - rented with operator at Uplifter
Task: Moving panes: 4000 x 2500 mm with 780 kg, 1000 x 2500 mm with 200 kg
Requirement: The large pane element has to be moved on the 1st floor. The opening for the patio door has only 1 cm clearance up and down to position the pane.
Gerhard, the fitter, approaches this job with a lot of thought and experience. With the Maeda MC405 mini crane, incidentally the strongest small crane in the MC series, he first lifts the GW1125 uplifter glassworker through the opening of the patio door to the second floor. This is followed by the XXL pane together with the glass trestle. Change of location: From the mini crane, he walks up to the upper floor. Gerhard takes over the operation of the glass lift himself. Here, absolute sure instinct is required to get this fixed glazing into dry cloths. There is a maximum clearance of only 1 cm above and below. It could hardly be tighter. The pane is slowly moved back and forth - and BANG - it is threaded through. RESPECT for this great performance. Uplifter machine operators rise to every challenge! Whether crane rental for a large construction site over several months or a daily project, the Uplifter rental park is well equipped for all lifting tasks. Let our competent crane rental team advise you right away without obligation.
We are on duty for you all over Europe and bring the machines directly to your construction site on request - with machine operator if you wish! At Uplifter you will find innovative glass mounting equipment that you can rent or buy from us in Würzburg and the surrounding area. Use our contact form or talk personally with the UPLIFTER GmbH & Co. KG contact person for Würzburg and surroundings. Uplifter - your competent manufacturer of lifting and vacuum technology for more than 20 years.
The best of 20 years of experience is in our largest and most powerful glassworker. 1,125 kg are no problem with this. Loads can be lifted up to a height of 4.55 meters. Thanks to a quick-change device, it is possible to switch quickly and effectively from the vacuum cross to, for example, a forklift fork or cable winch without tools.
The most important FACTS about the GW1125:
- Hydraulic supports double the load capacity in use
- Optical sensors prevent falling from floors, over landings and steps
- The vacuum cross can be quickly disassembled and used separately by means of a tilt adapter
Uplifter designs and manufactures machines to make your job easier! Innovation meets experience and customer value.
TIP: Use the GW1125 with winch to use the vacuum cross separately with optional tilt unit. The vacuum suction cup UPG1200 can also be used separately. Do you still have questions about this device - unique on the market? Do not hesitate and contact us.
Uplifter - everything from one source. Did you know that we are also successful in special machine construction? We would be happy to develop your lever solution to customer specifications - for trade and industry. Ask our innovative development and construction team without obligation and invest successfully in the future.
