The UPG1000 Vacuum Suction Cup lets you effortlessly lift and move loads of up to 1000kg. Thanks to the modular design, the suction cups can be optimally adjusted to the respective situation without tools. The extension arms allow even larger elements to be sucked even better and more pleasantly. The built-in support arm can be removed if necessary. Particular attention was paid to the development of suction cups. These have an extremely high adhesion and are characterized by their long durability. It is important when sucking in that the element to be lifted has a smooth, flat and impermeable surface. The suction process takes place directly on the device. Optionally, the suction process can be controlled via a wireless remote control. Also, the user is warned acoustically in case of impending vacuum loss. The supply of electricity is independent of the mains via the integrated battery. As a rule, the vacuum cleaner has an operating time of approx. 8 hours. If required, the suction system can be rotated 360 degrees and tilted 90 degrees and can be used on almost any construction site.
Technical Data
| Vacuum system | 2-circuit-system |
| Vacuum plates | 4 pcs. | 6 pcs. | 8 pcs. | 10 pcs. (ø 400 mm) |
| Lifting Capacity | 400 kg | 600 kg | 800 kg | 1000 kg |
| Device weight | 100 kg | 106 kg | 116 kg | 126 kg |
| Motor | Off-grid Motor with 12 volt rechargeable battery |
| Tiltable | Manually without raster |
| Rotatable | Manual turning 360° with raster 90° |
| Operating Time | 8 hours |
| Operating Temerature | 0° up to 40° C |
| Protective devices | Optic/acoustic warning devices (low Vacuum warning buzzer) |
| Attachment | 4 Extension arms |
| Optional | wireless remote control, Mount Extensions |
