WerStepLIFT
A powerful and smart device
little lift – pretty big
- multiple domains
- time-saving – installed in only few minutes even by a untrained person
- Easy set-up / 90 per cent time-saving
- little weight – heaviest component weights less than 30 kilograms (60 pounds) and is equipped with two carrying handles
- space-saving – fits into every room, because of its small base area
Art.-Nr.: 106723
Description
Every day heavy loads are transported up and down storeys for private and commercial use. Materials, furniture and building rubble have a lot of weight and produce lots of dirt, when being carried in the stairwell.
This takes much strength and often a renovation is necessary because of marks that arose while transporting. To avoid this, we have the perfect solution for you: a compact and powerful lift.
WERSTEPlift combines all advantages thanks to its special construction. This crane is assembled by only few components, which can be mounted easily within few minutes and without any tools.
Our lift is ideal for large construction sites as well as daily construction sites for which a complex installation is not profitable. Thanks to its small base area this lift fits into small rooms or even balconies. There is no need for counterweights, because WERSEPlift gets countered against the ceiling.
The units are ideal transportable with small utility vehicles and get assembled intuitively and easily. WERSTEPlift is popular in the entire construction industry. Removals are also done easily with this device. Our lift preserves the wholesomeness of your employees, avoids accidents, and saves power for the actual work. With 125 kilograms (250 pounds) load capacity and 12 meter lifting height loads can be elevated into the third floor with minimal effort.
| Werstep lift with boom | length/ width/ height | Package in the assembled state 3.000 / 1.010 / 2.010 mm Package in the disassembled state 3.000 / 1.010 / 250 mm |
| Slide without engine | length/ width/ height | 3000/70/95 mm |
| weight | 29,6 kg | |
| materials | steel profile | |
| handle | dimension between axes | 2.100 x 902 mm |
| weight | 32 kg | |
| protection device | round pipe, S195T/ST33-2, DIN 2440 EN 10255m | |
| base frame including hull | length/ width/ height | 1.260/1.100/300 mm |
| weight | 15 kg | |
| material | rectangular pipe, EN 10305-5, 60 x 30 x 2 | |
| material hulls | round pipe, EN 10219, S235JRH | |
| ceiling-pillar | threaded base plate length/ width/ diameter | 150/150/33 mm |
| weight | 5,3 kg | |
| material | round pipe blanc Ø 16, Rohr Ø 42 | |
| braces 4 pieces | length/ width/ height | 2 times: short 900. 2 times: long 1610 |
| weight | 5 kg | |
| material | half-inch-pipe | |
| engine-handle | length/ width/ height | 550/40/8 mm |
| weight | 1,3 kg | |
| material | flat bar steel, S235 | |
| carriages | quantity | 2 ball bearing |
| material | diverse | |
| studs for tilting 7 pieces | 12 Ø | |
| material | round bar steel, S355 | |
| handle for slide | length/ width | 150/55 mm |
| weight | 0,3 kg | |
| material | round bar steel, S355 | |
| nuts / screws | machine-screws 4 pieces | M8 x 25, 8.8 |
| washers 4 pieces | 8 millimetres | |
| coating | base-frame, studs for titling, ceiling-pillar, engine-handle | anti-corrosive C4, RAL 7016, fine structure |
| Technical characteristics electrical cable winch | Model MES 250-2 | |
| length/ width/ height | 345/130/250 mm | |
| load capacity | 125 kg | |
| lifting height | 12 m | |
| lifting velocity | 8 m/min | |
| line voltage | 230 V50 Hz | |
| cable diameter mm | 3 | |
| weight | 11 kg |
