
Mini Crane MC 285-3
Our most popular Mini Crane can be used in a wide range of Areas
- 2.82 t max capacity
- 8.7 m max lifting height
- Multi outrigger positions
- Crane/outrigger Iinterlock system
- 7” Display
- HBC Radio Remote Control
- Working limit settings
- Progra mmable moment limiter
- Data logger
- Tilt alarm
- 4/2 Fall hook block
- Optional detachable electric motor
- Optional 850 kg
- Searcher hook
- Optional single fall hook
- Optional 900 kg
- Auxiliary winch
Art.-Nr.: 100880
Description
With a large load capacity of 2820 kg, the MC 285-3 punches well above the weight its transport width of just 750 mm would suggest. With its slim chassis, it can easily fit through any standard doorway and can be used in areas that previously were inaccessible for normal cranes. The MC 285-3 is one of our most popular mini cranes and is used in the most diverse areas. Whether industrial or handicraft work, the MC 285-3 is always reliable. Especially the new model of the MC 285-3 that is equipped with enhanced safety features. The machine comes standard with a 4/2 fall hook block. It has an 8.7-meter telescopic boom and a swing radius of 360°. Its low weight of only 2.1 tonnes allows it to be set up on suspended ceilings, where it is often used for assembling façades. The popular mini crawler crane is optionally available with a combination motor and can therefore be operated with a powerful diesel engine or with an almost silent and emission-free 360 V 4-phase power cable. With these new technical features, this mini crane is even quicker and easier to operate than ever before.
Specifications
Capacity | max. 2,82 t x 1,4 m |
Working radius | max. 8,205 m x 150 kg |
Lifting height | max. 8,7 m x 550 kg |
Dimensions | MC 285CWM-3: 2800 mm x 750 mm x 1470 mm MC 285CWME-3: 3285 mm x 750 mm x 1470 mm |
Weight | MC 285 CRM: 1990 kg, MC 285 CRME: 2160 kg Hook block: 30kg |
Hook speed | max. 9,3 m / min, (4 falls, 4th layer) |
Single Line Speed | max. 37,2 m / min, (4th layer) |
Hoist Rope | IWRC 6 x Fi (29) Ø 7 mm x 48 m |
Telescopic System | Boom length: 2,535 m - 8,575 m Telescoping speed: 6,04 m / 22 s Boom type: Fully automatic 5 section pentagonal telescopic boom |
Boom Hoist System | Hoist angle: 0º - 80º, Speed: 14 s |
Slew System | Slew angle: 360º continuous, Speed: 1,0 U/min |
Outrigger System | Type: 1st stage with flexible stay damper, 2nd stage manual pullout, hydraulic cylinder direct acting type Maximum outriggers: (Length) 4782 mm x (Front) 4718 mm x (Rear) 3990 mm |
Traction System | Drive: Hydraulic motor driven, stepless speed changer Travel speed: 0 - 2.2 km/h Gradability: 20º Ground length x width: 975 mm x 200 mm Ground pressure: 0.510kgf / cm² (0.554 kgf/cm² CWME) |
Engine | Model: YANMAR 2TNV70-NMBA Type: 2 cylinder, water cooled diesel Rated output: 7.4 kW / 2500 rpm Starting method: Electric Fuel tank capacity: Diesel / 12L |
Electric Motor (Optional) | Type: Fully enclosed fan cooled motor Size: 5.5 kW 3-phase 380V |
Safe Load Indicator | Made specifically for Maeda Mini Cranes with a fully programmable working envelope |
Standard Equipment | Overwind protection, Hour meter, HBC radio remote control, Black rubber tracks, Hydraulic safety valves, Tilt alarm, EMO switch, Progra mmable Moment limiter, Working limit settings, Working status lamp, Load indicator, Wire rope latch, Data logger, Crane and outrigger interlock system, 4-fall / 2-fall hook block |
Optional Equipment | White Rubber Tracks; Single Fall Hook; 850 kg Searcher Hook; 900 kg Auxiliary Winch; Engine Heater; Hydraulic Heater; Spark Arrestor |